|
|
AstroMC Download Center--- Software/Firmware Updates
Our normal support hours are: Monday - Friday 1400-1730 Eastern US Time Zone. You can contact
us by email at any time; we try to service emails promptly. Beginning with Version 1.9.6 and by
pre-arranged time, we can log on to your observatory computer, and assist you in real-time.
If you are having difficulty with downloads, installation or operation, please leave word by telephone or preferably by email at Support@fostersystems.com. We will make arrangements to help you get started.
Beginning with Release 1.9.8 you must update to ASCOM platform Version 6.0 to take full advantage of the updates. if you have not done that until now; this is important for Windows Vista and Windows 7 PC's. Keep in mind that we have tested the Prolific driver that we have posted on this site. The drivers are changing rapidly because of Windows 7 (and its changes). We'll let you know if there's a driver change that you should accept.
_____________________________________________________________________________
AstroGraph Update Package Release 1.0.0 --- 09/25/11
(Standalone graphing software)
AstroGraph.zip
The new weather graphing package is here! This is a software only program which interfaces with your weather acquisition hardware. Supported weather monitors include: AstroAlert, Boltwood I/II. See the weather as it happens. This is a fully standalone package that does not require ASCOM.
Dashboard Update Release 1.9.8b1 ---- 08/29/11 --- Version 1 hardware only
(Interfaces with the AMC100(V)1 Hub)
AstroMC Dashboard.zip
This package is for Version 1 hardware and ASCOM 6 only
Roll off Roof Update Release 1.9.8b1 ---- 08/29/11
(Interfaces with the AMC100(V)2R Hub)
Roof Update.zip
This package is for Version 2 hardware and ASCOM 6 only with downloadable firmware.
Dome Update Package Release 1.9.8b1 ---- 08/29/11
(Interfaces with the AMC100(V)2D Hub)
Dome Update.zip
This package is for Version 2 hardware only with downloadable firmware.
AstroAlert Update Package Release 1.4.0
AstroMC AstroAlert Driver Setup.zip
This is the driver for the AMC-101 AstroAlert weather monitor when integrated in standalone mode using our AMC-100M mini-Hubdate. The AMC-101 can be configured as a Rain Detector with Ambient Light only. Options include: Sky Temperature, Ambient Temperature and Humidity, and Wind Conditions. This Driver supports the standalone method of integration which requires an AMC-100M. For users of our AMC-100, AMC-100s and AMC-100b series hardware, the AMC-101 plugs directly into those hubs, so this driver is not required.
If you are having difficulty with downloads, installation or operation, please leave word by telephone or preferably by email at Support@fostersystems.com. We will make arrangements to help you get started.
Beginning with Release 1.9.8 you must update to ASCOM platform Version 6.0 to take full advantage of the updates. if you have not done that until now; this is important for Windows Vista and Windows 7 PC's. Keep in mind that we have tested the Prolific driver that we have posted on this site. The drivers are changing rapidly because of Windows 7 (and its changes). We'll let you know if there's a driver change that you should accept.
_____________________________________________________________________________
AstroGraph Update Package Release 1.0.0 --- 09/25/11
(Standalone graphing software)
AstroGraph.zip
The new weather graphing package is here! This is a software only program which interfaces with your weather acquisition hardware. Supported weather monitors include: AstroAlert, Boltwood I/II. See the weather as it happens. This is a fully standalone package that does not require ASCOM.
Dashboard Update Release 1.9.8b1 ---- 08/29/11 --- Version 1 hardware only
(Interfaces with the AMC100(V)1 Hub)
AstroMC Dashboard.zip
This package is for Version 1 hardware and ASCOM 6 only
Roll off Roof Update Release 1.9.8b1 ---- 08/29/11
(Interfaces with the AMC100(V)2R Hub)
Roof Update.zip
This package is for Version 2 hardware and ASCOM 6 only with downloadable firmware.
Dome Update Package Release 1.9.8b1 ---- 08/29/11
(Interfaces with the AMC100(V)2D Hub)
Dome Update.zip
This package is for Version 2 hardware only with downloadable firmware.
AstroAlert Update Package Release 1.4.0
AstroMC AstroAlert Driver Setup.zip
This is the driver for the AMC-101 AstroAlert weather monitor when integrated in standalone mode using our AMC-100M mini-Hubdate. The AMC-101 can be configured as a Rain Detector with Ambient Light only. Options include: Sky Temperature, Ambient Temperature and Humidity, and Wind Conditions. This Driver supports the standalone method of integration which requires an AMC-100M. For users of our AMC-100, AMC-100s and AMC-100b series hardware, the AMC-101 plugs directly into those hubs, so this driver is not required.
Copyright © 2007-2011 Foster Systems, LLC All Rights Reserved.